​

Signal (signal-cli)

​

Prerequisites

• OpenClaw installed on your server (Linux flow below tested on Ubuntu 24).
• signal-cli available on the host where the gateway runs.
• A phone number that can receive one verification SMS (for SMS registration path).
• Browser access for Signal captcha (signalcaptchas.org) during registration.

​

Quick setup (beginner)

1. Use a separate Signal number for the bot (recommended).
2. Install signal-cli (Java required if you use the JVM build).
3. Choose one setup path:
   • Path A (QR link): signal-cli link -n "OpenClaw" and scan with Signal.
   • Path B (SMS register): register a dedicated number with captcha + SMS verification.
4. Configure OpenClaw and restart the gateway.
5. Send a first DM and approve pairing (openclaw pairing approve signal <CODE>).

{
  channels: {
    signal: {
      enabled: true,
      account: "+15551234567",
      cliPath: "signal-cli",
      dmPolicy: "pairing",
      allowFrom: ["+15557654321"],
    },
  },
}

​

What it is

• Signal channel via signal-cli (not embedded libsignal).
• Deterministic routing: replies always go back to Signal.
• DMs share the agent’s main session; groups are isolated (agent:<agentId>:signal:group:<groupId>).

​

Config writes

{
  channels: { signal: { configWrites: false } },
}

​

The number model (important)

• The gateway connects to a Signal device (the signal-cli account).
• If you run the bot on your personal Signal account, it will ignore your own messages (loop protection).
• For “I text the bot and it replies,” use a separate bot number.

​

Setup path A: link existing Signal account (QR)

1. Install signal-cli (JVM or native build).
2. Link a bot account:
   • signal-cli link -n "OpenClaw" then scan the QR in Signal.
3. Configure Signal and start the gateway.

{
  channels: {
    signal: {
      enabled: true,
      account: "+15551234567",
      cliPath: "signal-cli",
      dmPolicy: "pairing",
      allowFrom: ["+15557654321"],
    },
  },
}

​

Setup path B: register dedicated bot number (SMS, Linux)

1. Get a number that can receive SMS (or voice verification for landlines).
   • Use a dedicated bot number to avoid account/session conflicts.
2. Install signal-cli on the gateway host:

VERSION=$(curl -Ls -o /dev/null -w %{url_effective} https://github.com/AsamK/signal-cli/releases/latest | sed -e 's/^.*\/v//')
curl -L -O "https://github.com/AsamK/signal-cli/releases/download/v${VERSION}/signal-cli-${VERSION}-Linux-native.tar.gz"
sudo tar xf "signal-cli-${VERSION}-Linux-native.tar.gz" -C /opt
sudo ln -sf /opt/signal-cli /usr/local/bin/
signal-cli --version

3. Register and verify the number:

signal-cli -a +<BOT_PHONE_NUMBER> register

1. Open https://signalcaptchas.org/registration/generate.html.
2. Complete captcha, copy the signalcaptcha://... link target from “Open Signal”.
3. Run from the same external IP as the browser session when possible.
4. Run registration again immediately (captcha tokens expire quickly):

signal-cli -a +<BOT_PHONE_NUMBER> register --captcha '<SIGNALCAPTCHA_URL>'
signal-cli -a +<BOT_PHONE_NUMBER> verify <VERIFICATION_CODE>

4. Configure OpenClaw, restart gateway, verify channel:

# If you run the gateway as a user systemd service:
systemctl --user restart openclaw-gateway

# Then verify:
openclaw doctor
openclaw channels status --probe

5. Pair your DM sender:
   • Send any message to the bot number.
   • Approve code on the server: openclaw pairing approve signal <PAIRING_CODE>.
   • Save the bot number as a contact on your phone to avoid “Unknown contact”.

• signal-cli README: https://github.com/AsamK/signal-cli
• Captcha flow: https://github.com/AsamK/signal-cli/wiki/Registration-with-captcha
• Linking flow: https://github.com/AsamK/signal-cli/wiki/Linking-other-devices-(Provisioning)

​

External daemon mode (httpUrl)

{
  channels: {
    signal: {
      httpUrl: "http://127.0.0.1:8080",
      autoStart: false,
    },
  },
}

​

Access control (DMs + groups)

• Default: channels.signal.dmPolicy = "pairing".
• Unknown senders receive a pairing code; messages are ignored until approved (codes expire after 1 hour).
• Approve via:
  • openclaw pairing list signal
  • openclaw pairing approve signal <CODE>
• Pairing is the default token exchange for Signal DMs. Details: Pairing
• UUID-only senders (from sourceUuid) are stored as uuid:<id> in channels.signal.allowFrom.

• channels.signal.groupPolicy = open | allowlist | disabled.
• channels.signal.groupAllowFrom controls who can trigger in groups when allowlist is set.

​

How it works (behavior)

• signal-cli runs as a daemon; the gateway reads events via SSE.
• Inbound messages are normalized into the shared channel envelope.
• Replies always route back to the same number or group.

​

Media + limits

• Outbound text is chunked to channels.signal.textChunkLimit (default 4000).
• Optional newline chunking: set channels.signal.chunkMode="newline" to split on blank lines (paragraph boundaries) before length chunking.
• Attachments supported (base64 fetched from signal-cli).
• Default media cap: channels.signal.mediaMaxMb (default 8).
• Use channels.signal.ignoreAttachments to skip downloading media.
• Group history context uses channels.signal.historyLimit (or channels.signal.accounts.*.historyLimit), falling back to messages.groupChat.historyLimit. Set 0 to disable (default 50).

​

Typing + read receipts

• Typing indicators: OpenClaw sends typing signals via signal-cli sendTyping and refreshes them while a reply is running.
• Read receipts: when channels.signal.sendReadReceipts is true, OpenClaw forwards read receipts for allowed DMs.
• Signal-cli does not expose read receipts for groups.

​

Reactions (message tool)

• Use message action=react with channel=signal.
• Targets: sender E.164 or UUID (use uuid:<id> from pairing output; bare UUID works too).
• messageId is the Signal timestamp for the message you’re reacting to.
• Group reactions require targetAuthor or targetAuthorUuid.

message action=react channel=signal target=uuid:123e4567-e89b-12d3-a456-426614174000 messageId=1737630212345 emoji=🔥
message action=react channel=signal target=+15551234567 messageId=1737630212345 emoji=🔥 remove=true
message action=react channel=signal target=signal:group:<groupId> targetAuthor=uuid:<sender-uuid> messageId=1737630212345 emoji=✅

• channels.signal.actions.reactions: enable/disable reaction actions (default true).
• channels.signal.reactionLevel: off | ack | minimal | extensive.
  • off/ack disables agent reactions (message tool react will error).
  • minimal/extensive enables agent reactions and sets the guidance level.
• Per-account overrides: channels.signal.accounts.<id>.actions.reactions, channels.signal.accounts.<id>.reactionLevel.

​

Delivery targets (CLI/cron)

• DMs: signal:+15551234567 (or plain E.164).
• UUID DMs: uuid:<id> (or bare UUID).
• Groups: signal:group:<groupId>.
• Usernames: username:<name> (if supported by your Signal account).

​

Troubleshooting

openclaw status
openclaw gateway status
openclaw logs --follow
openclaw doctor
openclaw channels status --probe

openclaw pairing list signal

• Daemon reachable but no replies: verify account/daemon settings (httpUrl, account) and receive mode.
• DMs ignored: sender is pending pairing approval.
• Group messages ignored: group sender/mention gating blocks delivery.
• Config validation errors after edits: run openclaw doctor --fix.
• Signal missing from diagnostics: confirm channels.signal.enabled: true.

openclaw pairing list signal
pgrep -af signal-cli
grep -i "signal" "/tmp/openclaw/openclaw-$(date +%Y-%m-%d).log" | tail -20

​

Security notes

• signal-cli stores account keys locally (typically ~/.local/share/signal-cli/data/).
• Back up Signal account state before server migration or rebuild.
• Keep channels.signal.dmPolicy: "pairing" unless you explicitly want broader DM access.
• SMS verification is only needed for registration or recovery flows, but losing control of the number/account can complicate re-registration.

​

Configuration reference (Signal)

• channels.signal.enabled: enable/disable channel startup.
• channels.signal.account: E.164 for the bot account.
• channels.signal.cliPath: path to signal-cli.
• channels.signal.httpUrl: full daemon URL (overrides host/port).
• channels.signal.httpHost, channels.signal.httpPort: daemon bind (default 127.0.0.1:8080).
• channels.signal.autoStart: auto-spawn daemon (default true if httpUrl unset).
• channels.signal.startupTimeoutMs: startup wait timeout in ms (cap 120000).
• channels.signal.receiveMode: on-start | manual.
• channels.signal.ignoreAttachments: skip attachment downloads.
• channels.signal.ignoreStories: ignore stories from the daemon.
• channels.signal.sendReadReceipts: forward read receipts.
• channels.signal.dmPolicy: pairing | allowlist | open | disabled (default: pairing).
• channels.signal.allowFrom: DM allowlist (E.164 or uuid:<id>). open requires "*". Signal has no usernames; use phone/UUID ids.
• channels.signal.groupPolicy: open | allowlist | disabled (default: allowlist).
• channels.signal.groupAllowFrom: group sender allowlist.
• channels.signal.historyLimit: max group messages to include as context (0 disables).
• channels.signal.dmHistoryLimit: DM history limit in user turns. Per-user overrides: channels.signal.dms["<phone_or_uuid>"].historyLimit.
• channels.signal.textChunkLimit: outbound chunk size (chars).
• channels.signal.chunkMode: length (default) or newline to split on blank lines (paragraph boundaries) before length chunking.
• channels.signal.mediaMaxMb: inbound/outbound media cap (MB).

• agents.list[].groupChat.mentionPatterns (Signal does not support native mentions).
• messages.groupChat.mentionPatterns (global fallback).
• messages.responsePrefix.